Aura L4-2.4L Hybrid (2009)
8. Connect the transaxle range switch electrical connectors.
9. Install the shift control cable to transaxle range switch lever and verify proper operation.
10. Install the shift control cable to transaxle range switch lever and verify proper operation.
Installation Procedure (New Switch)
1. Make sure the transaxle manual shaft is in the Neutral position.
2. Align the flats on the transaxle shift shaft with the flats on the transaxle range switch and install the switch.
3. Tighten the transaxle range switch bolts to 20 Nm (15 lb ft).
4. Install the transaxle range switch lever and nut and tighten the nut to 35 Nm (26 lb ft).