saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Cloth Insert|Page 6416 > < Cloth Insert|Page 6414
Page 11
background image

REMOVAL

1. Lift one corner of the speaker grille.
2. Release the other tabs and remove speaker grille.

INSTALLATION

1. Position tabs in the correct location.
2. Push grille into place.

Two Piece Outer Door Skin Panel

REMOVAL

1. Remove outer door panel.
2. Remove door outer panel upper to lower screws. Rotate lower outer panel upward to disen& gage tabs and separate lower from upper.
3. If damaged, remove foam sealing strip from door outer upper horizontal attaching flange.

4. If replacing upper:

a. Remove door lock cylinder bezel compressing retainer tabs and pushing out.
b. Remove J-clips.
c. Remove trim molding and clip.

5. If replacing lower:

a. Remove rivets by pushing mandrel out with punch and remove outer door panel lower sealing strip.
b. Remove J-clips.

INSTALLATION

1. If replacing upper:

a. Install clip and trim molding.
b. Install door lock cylinder bezel.
c. Install J-clips

Cloth Insert|Page 6416 > < Cloth Insert|Page 6414