Coupe L4-1.9L DOHC VIN 7 (1994)
Switch resistance at connector terminal pins:
Pin B to Pin C: < 1 ohm in Hazard OFF
Pin A to Pin C: < 1 ohm in Hazard ON
Switch resistance at connector terminal pins:
Pin A to all other Pins: OPEN when Hazard OFF
Pin A to all other Pins: < 1 ohm when Hazard ON
Pin A to all other Pins: OPEN when BOTH Turn Signals OFF
Pin A to Pins D,E,F: < 1 ohm when LEFT Turn Signal ON
Pin A to Pins B,G,H: < 1 ohm when RIGHT Turn Signal ON
Pin A to all other Pins: < 1 ohm when Hazard and Turn Signal ON
Switch is OPEN in ALL other pin and switch position combinations.
Repair as needed.
Bulbs
Check connections and terminals for damage, tightness, or corrosion. Visually inspect the bulb. Check resistance through the bulb. Repair as
needed. If this component is good, go to the next item indicated on the Symptom Chart.
Front Park/Turn Lamp Assemblies
Damage, tightness, or corrosion. Check resistance through the bulb sockets. Repair as needed. If this component is good, go to the next item
indicated on the Symptom Chart.
Rear Turn/Stop Lamp Assemblies
Check connections and terminals for damage, tightness, or corrosion. Check resistance through the bulb sockets. Repair as needed. If this
component is good, go to the next item indicated on the Symptom Chart.