ION L4-2.2L VIN F (2004)
4. For the sedan emblem/nameplate, install to the following dimensions:
*
Dimension (a) is 76.6 mm (3.02 in) from the left edge of the rear compartment lid applique to the nameplate.
*
Dimension (b) is 97.6 mm (5.83 in) from the bottom feature line of the rear compartment lid applique to the nameplate.
5. For the coupe emblem/nameplate, install to the following dimensions:
*
Dimension (a) is 97.9 mm (3.85 in) from the left edge of the rear compartment lid applique to the nameplate.
*
Dimension (b) is 142.3 mm (5.6 in) from the bottom feature line of the rear compartment lid applique to the nameplate.
6. Use J 25070 to heat the mounting surface to approximately 27-41°C (80-105°F).
7. Ensure that the temperature of the emblem/nameplate is approximately 29-32°C (85-90°F).
Important: Do not touch the adhesive backing on the emblem/nameplate.
8. Remove the protective liner from the back of the emblem/name plate.
9. Position the emblem/nameplate to the location marks and press the emblem/nameplate to the mounting surface.