ION L4-2.2L VIN F (2004)
![background image](/saturn/ion/l4-2.2l_vin_f/Page-2402005.png)
Retainer Replacement - Rear (Coupe)) .
5. Remove the anchor bolts from the front seat belt retractors.
6. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear (Coupe) (See: Seats/Seat Cushion/Service and Repair/Removal and
Replacement/Seat Cushion Replacement - Rear (Coupe))Seat Cushion Replacement - Rear (Sedan) (See: Seats/Seat Cushion/Service and
Repair/Removal and Replacement/Seat Cushion Replacement - Rear (Sedan)) in Seats.
7. On the sedan, pull the lower clips to disengage the clips from the center pillar garnish molding.
8. Remove the carpet from the vehicle.
Installation Procedure
Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as
the original installation. Always return the carpet to the original location.
1. Position the carpet in the vehicle. Align the front holes over the weld studs in the floor pan. Ensure that the carpet is lying properly over the
console area. Tuck the carpet behind the H brace. Fit the carpet over all of the rear seat heat ducts.