ION L4-2.2L VIN F (2004)
REMOVAL PROCEDURE
1. On the coupe, remove the upper garnish molding on the lock pillar.
2. Remove the rear seat cushion.
3. Remove the rear carpet retainer.
4. Lower the rear folding seat back:
1. Open the trunk.
2. Pull the latch release handle.
5. Remove the push-in retainer.
6. Disengage the clips by pulling at the clip locations.
7. Slide the lock pillar trim out from underneath the seat belt webbing.
8. Remove the lower garnish molding at the lock pillar from the vehicle.
9. Remove the rerouter from the child shoulder belt guide.
INSTALLATION PROCEDURE