ION L4-2.2L VIN F (2004)
1. Install the center pillar trim to the upper trim clip by sliding the trim down. Ensure that the trim is properly seated in the upper clip.
2. Push the lower trim clip to install the clip.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the bolt to the adjustable guide loop on the front seat belt.
Tighten the bolt to 45 N.m (33 lb ft).
4. Install the height adjuster knob.
1. Snap the top end of the knob onto the seat belt height adjuster.
2. Push on the bottom of the knob until the knob snaps into place.
5. Inspect the seat belt for proper operation.