ION L4-2.2L VIN F (2004)
8. Install the anchor bolt to the front seat belt.
Tighten the bolt to 45 N.m (33 lb ft).
9. Install the rear carpet retainer by pressing until the trim clips engage.
10. Install the rearward clips of the front carpet retainer over the edge of the center pillar garnish molding.
11. Enable the SIR. Refer to SIR Disabling and Enabling Zone 2 (Coupe) SIR Disabling and Enabling Zone 2 (Sedan) and to SIR Disabling and
Enabling Zone 6 (Coupe) SIR Disabling and Enabling Zone 6 (Sedan) in SIR.
Garnish Molding Replacement - Center Pillar Upper (Sedan)
Garnish Molding Replacement - Center Pillar Upper (Sedan)
Removal Procedure