ION L4-2.2L VIN F (2004)
![background image](/saturn/ion/l4-2.2l_vin_f/Page-2432026.png)
Notice: Refer to Fastener Notice in Cautions and Notices.
6. Install the seat belt anchor bolt.
Tighten the bolt to 45 N.m (33 lb ft).
7. Install the seat belt webbing in the head restraint webbing guide.
Trim Panel Replacement - Rear Window Shelf (Early Production)
TRIM PANEL REPLACEMENT - REAR WINDOW SHELF (EARLY PRODUCTION)
REMOVAL PROCEDURE
1. If equipped, disable the roof rail airbag module. Refer to SIR Disabling and Enabling Zone 2 (Coupe) SIR Disabling and Enabling Zone 2 (Sedan)
and SIR Disabling and Enabling Zone 6 (Coupe) SIR Disabling and Enabling Zone 6 (Sedan) in Restraint Systems.
CAUTION: Refer to SIR Caution in Service Precautions.
2. Remove the rear seat cushion.
3. Remove the rear seat back.
4. Remove the upper lock pillar trim.
5. Remove the lower lock pillar trim.
6. On the sedan, disconnect the center seat belt webbing from the anchoring buckle by inserting an awl in the slot at the top of the buckle.