ION L4-2.2L VIN F (2004)
6. On the sedan, install the center seat belt webbing in the anchoring buckle.
7. Install the lower lock pillar trim.
8. Install the upper lock pillar trim.
9. Install the rear seat back.
10. Install the rear seat cushion.
11. If equipped, enable the roof rail airbag module. Refer to SIR Disabling and Enabling Zone 2 (Coupe) SIR Disabling and Enabling Zone 2 (Sedan)
and SIR Disabling and Enabling Zone 6 (Coupe) SIR Disabling and Enabling Zone 6 (Sedan) in Restraint Systems.
Trim Panel Replacement - Rear Window Shelf (Late Production)
TRIM PANEL REPLACEMENT - REAR WINDOW SHELF (LATE PRODUCTION)
REMOVAL PROCEDURE
1. If equipped, disable the roof rail airbag module. Refer to SIR Disabling and Enabling Zone 2 (Coupe) SIR Disabling and Enabling Zone 2 (Sedan)
and to SIR Disabling and Enabling Zone 6 (Coupe) SIR Disabling and Enabling Zone 6 (Sedan) in Restraint Systems.
CAUTION: Refer to SIR Caution in Service Precautions.
2. Remove the rear seat cushion.
3. Remove the rear seat back.
4. Remove the upper lock pillar trim.
5. Remove the lower lock pillar trim.