ION L4-2.2L VIN F (2004)
![background image](/saturn/ion/l4-2.2l_vin_f/Page-2432037.png)
6. On the sedan, install the center seat belt webbing in the anchoring buckle.
7. Install the lower lock pillar trim. Refer to Garnish Molding Replacement - Lock Pillar Lower (See: Garnish Molding Replacement - Lock Pillar
Lower) .
8. Install the upper lock pillar trim. Refer to Garnish Molding Replacement - Lock Pillar Upper (See: Garnish Molding Replacement - Lock Pillar
Upper) .
9. Install the rear seat back. Refer to Seat Back Replacement - Rear Split Folding (See: Seats/Seat Back/Service and Repair/Removal and
Replacement/Seat Back Replacement - Rear Split Folding) in Seats.
10. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear (Coupe) (See: Seats/Seat Cushion/Service and Repair/Removal and
Replacement/Seat Cushion Replacement - Rear (Coupe))Seat Cushion Replacement - Rear (Sedan) (See: Seats/Seat Cushion/Service and
Repair/Removal and Replacement/Seat Cushion Replacement - Rear (Sedan)) in Seats.
11. If equipped, enable the roof rail airbag module. Refer to SIR Disabling and Enabling Zone 2 (Coupe) SIR Disabling and Enabling Zone 2 (Sedan)
and SIR Disabling and Enabling Zone 6 (Coupe) SIR Disabling and Enabling Zone 6 (Sedan) in SIR.
Trim Panel Replacement - Rear Window Shelf (Late Production)
Trim Panel Replacement - Rear Window Shelf (Late Production)
Removal Procedure
Caution: Refer to SIR Caution in Cautions and Notices.
1. If equipped, disable the roof rail airbag module. Refer to SIR Disabling and Enabling Zone 2 (Coupe) SIR Disabling and Enabling Zone 2
(Sedan) and toSIR Disabling and Enabling Zone 6 (Coupe) SIR Disabling and Enabling Zone 6 (Sedan) in SIR.
2. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear (Coupe) (See: Seats/Seat Cushion/Service and Repair/Removal and
Replacement/Seat Cushion Replacement - Rear (Coupe))Seat Cushion Replacement - Rear (Sedan) (See: Seats/Seat Cushion/Service and
Repair/Removal and Replacement/Seat Cushion Replacement - Rear (Sedan)) in Seats.
3. Remove the rear seat back. Refer to Seat Back Replacement - Rear Split Folding (See: Seats/Seat Back/Service and Repair/Removal and
Replacement/Seat Back Replacement - Rear Split Folding) in Seats.
4. Remove the upper lock pillar trim. Refer to Garnish Molding Replacement - Lock Pillar Upper (See: Garnish Molding Replacement - Lock Pillar
Upper) .
5. Remove the lower lock pillar trim. Refer to Garnish Molding Replacement - Lock Pillar Lower (See: Garnish Molding Replacement - Lock Pillar
Lower) .
6. Remove the rear seat belt anchor bolts.