ION L4-2.2L VIN F (2004)
Power Mirror Motor: Removal and Replacement
Motor Replacement - Power Mirror
Removal Procedure
1. Remove the mirror face. Refer to Mirror Face Replacement (See: Service and Repair/Mirror Face Replacement) .
2. Remove the mirror. Refer to Mirror Replacement (See: Service and Repair/Door Mirror Replacement) .
3. Remove the mirror motor attaching screws.
4. Remove the mirror motor from the mirror housing.
Installation Procedure
1. Position the mirror motor to the mirror housing.
2. Route the electrical connector through the door opening.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the mirror motor attaching screws.
Tighten the motor attaching screws to 3 N.m (27 lb in).
4. Install the mirror face. Refer to Mirror Face Replacement (See: Service and Repair/Mirror Face Replacement) .
5. Remove the mirror face. Refer to Mirror Face Replacement (See: Service and Repair/Mirror Face Replacement) .