ION L4-2.2L VIN F (2004)
INSTALLATION PROCEDURE
1. Synchronize the sunroof motor to the sunroof mechanism. Refer to Sunroof Motor Synchronization.
2. Install the sunroof actuator to the sunroof module.
3. Install the sunroof actuator screws.
NOTE: Refer to Fastener Note in Service Precautions.
Tighten the screws to 5.5 N.m (50 lb in).
4. Connect the electrical connectors to the sunroof motor/actuator.
5. Secure the electrical harness to the sunroof module.
6. Verify the sunroof operation.
7. Install the headliner.