ION L4-2.2L VIN F (2004)
HEAD RESTRAINT GUIDE REPLACEMENT - FRONT SEAT (NON-FOLD FLAT)
REMOVAL PROCEDURE
1. Remove the front seat from the vehicle.
2. Remove the head restraint.
3. Remove the outer trim panel from the front seat cushion.
4. Position the seat back forward to expose the lower J-hook retainer on the seat back trim cover.
5. Disconnect the J-hook retainer.
6. Position the seat back rearward and pull the trim cover out from between the seat back and the cushion.
7. Pull the seat back cover up. Carefully disengage the hook and loop and retainers until the head restraint guides are exposed.
NOTE: Use care when disengaging the hook and loop fasteners. The hook end may pull from the seat foam pad, requiring foam pad replacement.