ION L4-2.2L VIN F (2004)
1. Apply a thin, light coating of high temperature silicone brake lubricant to the brake caliper guide pin boots (1).
2. Fully install the guide pin boots (1) to the brake caliper mounting bracket.
Important: Ensure that there is not a build up of lubricant at the end of the upper guide pin, ahead of the bushing.
3. Apply a light coating of high temperature silicone brake lubricant to the brake caliper guide pins, including the bushing on the upper guide pin.
Apply very little lubricant to the end of the upper guide pin, ahead of the bushing.
4. Install the brake caliper guide pins (1) to the caliper mounting bracket. Ensure that the rim of the guide pin boots is fully seated in the groove on
the guide pins.
5. Apply a very thin coating of high temperature silicone brake lubricant to the pad hardware mating surfaces (1) of the caliper bracket only.
6. If reusing the brake pad retainers, clean the brake pad mating surfaces of the brake pad retainers (2).
7. Install the brake pad retainers (2) to the brake caliper bracket.