ION L4-2.2L VIN F (2004)
1. Install the brake hose to the brake hose mounting brackets. Align the hose fittings with the notch in the brackets.
2. Install the hose retaining clips (1) onto the hose fittings at the hose brackets.
Notice: Refer to Fastener Notice in Service Precautions.
3. Using a backup wrench on the hose fitting, connect the brake pipe fittings at the rear brake hose.
-
Tighten the fittings to 19 Nm (14 ft. lbs.).
4. Install the tire and wheel assembly.
5. Ensure that the hose does not make contact with any part of the suspension. If the hose makes contact, remove the hose and correct the condition.
6. Bleed the hydraulic brake system.
7. Lower the vehicle.
