ION L4-2.2L VIN F (2004)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve Bracket Replacement
Brake Pressure Modulator Valve Bracket Replacement
Removal Procedure
1. Turn the ignition switch to the OFF position.
2. Release the Electronic Brake Control Module (EBCM) wiring harness retainer from the Brake Pressure Modulator Valve (BPMV) bracket.
3. Loosen the 2 insulator nuts (1) on the BPMV assembly.
4. Carefully lift the brake modulator assembly just enough to clear the bracket, then support the assembly.
5. Release the forward lamp wiring harness from the BPMV bracket.
