ION L4-2.2L VIN F (2004)
Vacuum Brake Booster: Service and Repair
(W/ RPO M43, M86)
Vacuum Brake Booster Replacement (W/ RPO M43, M86)
Caution: Refer to Brake Fluid Irritant in Service Precautions.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components in Service Precautions.
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the cover from the underhood electrical center.
3. Pull back on the Connector Position Assurance (CPA) tab of the electrical connector, then disconnect the connector from the brake fluid level
sensor.
4. Remove the underhood electrical center bracket from the vehicle and reposition the electrical center (1) to access the brake master cylinder and
brake booster.
