ION L4-2.2L VIN F (2004)
3. With the surge tank raised, install the surge tank outlet hose.
4. Reposition the hose clamp using SA91 11 E to secure the hose.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the surge tank bolt.
^
Tighten the bolt to 8 Nm (70 inch lbs.).
6. Set the underhood junction block bracket into position.
7. Install the underhood junction block bracket nuts (1,2).
^
Tighten the nuts to 10 Nm (88 inch lbs.).
8. Install the underhood junction block bracket bolt (3).
^
Tighten the bolt to 25 Nm (18 ft. lbs.)
9. Install the surge tank inlet hose to the surge tank.
10. Reposition the hose clamp to secure the hose.