ION L4-2.2L VIN F (2004)
3. Install the heater core cover screws.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Make certain that the heater core cover is properly positioned and is fully seated on the HVAC module before installing the screws.
Be sure to install all heater core cover screws.
Tighten
Tighten the heater core cover screws to 1.8 N.m (15 lb in).
4. Align the center floor duct with the HVAC module.
5. Push the center floor duct up while rotating rearward in the vehicle to install on the HVAC module.
6. Push down on the floor duct while rotating the center floor outlet ducts to align the ducts.
7. Slide the center floor outlet duct down into position in the floor ducts.
8. Install the accelerator control pedal.
