ION L4-2.2L VIN F (2004)
Engine Mount: Service and Repair
Powertrain Mount Balance Procedure Total Mount
Powertrain Mount Balance Procedure Total Mount
Important: Follow the balance procedure in the order listed in the following steps. Powertrain mounts must be tightened in sequence.
1. Raise and support the vehicle. Refer Vehicle Lifting.
2. Loosen the front transmission mount through bolt. Do not remove.
3. Loosen the rear transmission mount through bolt. Do not remove.
4. Position two floor jacks with wood blocks under the engine and transmission to support the powertrain assembly.
5. From the engine compartment, loosen the transmission mount to transmission bolts.