ION L4-2.2L VIN F (2004)
1. If applicable, install the intake manifold gasket.
2. Install the intake manifold.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the intake manifold nuts and bolts.
^
Tighten the intake manifold nuts and bolts to 10 Nm (89 inch lbs.).
4. Install the knock sensor harness connector to the intake manifold.
5. Connect the knock sensor electrical connector.
6. Install the fuel rail.
7. Install the throttle body.
8. Install the oil level indicator tube bolt.
^
Tighten the oil level indicator tube bolt to 10 Nm (89 inch lbs.).
9. Connect the brake booster hose.
10. Connect the purge solenoid tube.
11. Connect the PCV hose.
12. Install the throttle body.
13. Install the air cleaner outlet resonator.