ION L4-2.2L VIN F (2004)
1. Install new sealing washers on the condenser tube and evaporator hose fittings.
2. Install the condenser tube and evaporator hose to the TXV.
3. Install the TXV nut.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 20 N.m (15 lb ft).
4. Install the condenser tube to the front of dash.
Tighten
Tighten the nut to 10 N.m (88 lb in).