ION L4-2.2L VIN F (2004)
Housing Assembly HVAC: Service and Repair
HVAC Module Assembly Replacement
HVAC MODULE ASSEMBLY REPLACEMENT
TOOLS REQUIRED
-
J 39400-A Halogen Leak Detector
-
SA9111E Hose Clamp Pliers
CAUTION: With a pressurized cooling system, the coolant temperature in the radiator can be considerably higher than the boiling point of
the solution at atmospheric pressure. Removal of the surge tank cap, while the cooling system is hot and under high pressure, causes the
solution to boil instantaneously with explosive force. This will cause the solution to spew out over the engine, the fenders, and the person
removing the cap. Serious bodily injury may result.
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
3. Remove the surge tank cap.
4. Place a drain pan below the heater hoses.