ION L4-2.2L VIN F (2004)
5. Connect the seat belt pretensioner-LF and install the CPA.
6. Install the lower center pillar.
7. Install the AIR BAG fuse into the body control module fuse center.
8. Install the body control module fuse center cover.
9. Use caution while reaching in and turn the ignition switch to the ON position.The AIR BAG indicator will flash then turn OFF.
10. Perform the SIR Diagnostic System Check if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System Check -
Restraint Systems.