ION L4-2.2L VIN F (2004)
1. To replace the wiring harness, perform the following steps:
1. Install the wiring harness through the park/turn bulb access opening starting with the headlamp connector (3).
2. Push the headlamp connector up into the headlamp opening.
3. Pull the 6-pin connector through the grommet opening in the headlamp assembly.
4. Pull the grommet. Seat the grommet into the opening (1)
5. Fasten the 6-pin connector to the tab on the headlamp housing (2)
2. Install the park/turn bulb into the bulb socket.