ION L4-2.2L VIN F (2004)
Coolant Line/Hose: Service and Repair
Surge Tank Hose/Pipe Replacement - Inlet
Surge Tank Hose/Pipe Replacement - Inlet
Caution: With a pressurized cooling system, the coolant temperature in the radiator can be considerably higher than the boiling point of the
solution at atmospheric pressure. Removal of the surge tank cap, while the cooling system is hot and under high pressure, causes the solution
to boil instantaneously with explosive force. This will cause the solution to spew out over the engine, the fenders, and the person removing the
cap. Serious bodily injury may result.
Removal Procedure
1. Remove the surge tank cap.
2. Reposition the surge tank inlet hose clamp.
3. Remove the surge tank inlet hose from the surge tank.