ION L4-2.2L VIN F (2004)
Perform steps 17-21 on all vehicles.
17.
Position each headlamp assembly in its respective vehicle opening and connect remaining headlamp wiring harness connector to connector on the
headlamp assembly.
18.
Install each headlamp assembly into its respective headlamp bracket and install headlamp assembly retaining pins by pushing down on the pins.
19.
Clear diagnostic trouble codes (DTCs) from body control module (BCM) using Tech 2 scan tool.
20.
Activate left and right turn signal to verify proper operation.
21.
Close the hood.