ION L4-2.2L VIN F (2004)
Transmission Position Switch/Sensor: Service and Repair
Park/Neutral Position Switch Replacement
^
Tools Required
-
J 36346 Fascia Retainer Remover
-
J 45404 Transmission Indicator Alignment Tool
Removal Procedure
1. Apply the parking brake.
2. Place the transmission shift lever in the neutral position.
3. Using the J 36346 or equivalent, disconnect the shift cable from the transmission control.
4. Disconnect the Park/neutral position switch harness connector.
5. Remove the transmission control nut (1) and lever (2).
6. Using a small screwdriver, bend the lock washer tabs down on the manual shaft nut.