ION L4-2.2L VIN F (2004)
IMPORTANT: The reservoir must be tipped slightly during installation to avoid bending the fuel level sensor float arm.
2. Tilt the pump module toward the rear of the fuel tank to enable the level sensor float arm to clear the tank opening. Install the fuel pump module to
the fuel tank.
3. Slowly lower the fuel pump module assembly into the tank. Ensure that the fuel level sensor harness connector is positioned properly.
4. Install the fuel pump module retaining lock ring over the module pipes and electrical harness, and into position on the top of the module.
5. Using the SA9156E , or J 39765 (1), carefully rotate to fully secure the fuel pump module retaining lock ring.
IMPORTANT: Ensure that the fuel pump module retaining lock ring is fully seated within the fuel tank retaining tab slots.