ION L4-2.2L VIN F (2004)
7. Remove the garnish molding from the upper lock pillar.
8. Remove the connector position assurance (CPA) from the roof rail module-left connector.
9. Disconnect the roof rail module-left connector from the vehicle harness connector.
10. Lower the headliner to access the seat belt pretensioner-LF connector.
11. Remove the CPA from the seat belt pretensioner-LF connector.
12. Disconnect the seat belt pretensioner-LF connector.
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. To enable the roof rail module-left, skip to step 5. To enable both the roof rail module-left and the seat belt pretensioner-LF, continue to step 3.