ION L4-2.2L VIN F (2004)
1. Position the pretensioner in the vehicle.
2. Install the pretensioner bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 45 N.m (33 lb ft).
3. Connect the electrical connector to the retractor pretensioner.
4. Install the headliner.
5. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 2 (Coupe) SIR Disabling and Enabling Zone 2 (Sedan) or SIR Disabling and
Enabling Zone 6 (Coupe) SIR Disabling and Enabling Zone 6 (Sedan).
6. Inspect the seat belt for proper operation.