ION L4-2.2L VIN F (2004)
Negative: Service and Repair
Replacement (Engine to Chassis) Procedure
BATTERY NEGATIVE CABLE REPLACEMENT (ENGINE TO CHASSIS)
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the ground cable from the positive battery cable near the transmission.
3. Disconnect the ground cable at the rear of the engine (1).
4. Remove the bolt retaining the ground cable at the side rail (2).
5. Remove the ground cable from the vehicle, noting the routing for installation.
INSTALLATION PROCEDURE
1. Position the ground cable as noted during removal.
2. Install the ground cable to side rail bolt (2).