ION L4-2.2L VIN F (2004)
Positive: Service and Repair
Replacement (Underhood Junction) Procedure
BATTERY POSITIVE CABLE REPLACEMENT (UNDERHOOD JUNCTION BLOCK TO STARTER)
REMOVAL PROCEDURE
IMPORTANT
-
Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
-
Always route the replacement cable the same way as the original cable.
1. Disconnect the negative battery cable from the battery.
2. Disconnect the positive battery cable (1) from the under hood junction block terminal.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Disconnect the positive cable from the negative cable near the transmission.