ION L4-2.2L VIN F (2004)
11.
Install the upper strut cap.
Tighten
Tighten the cap screws to 14 N.m (10 lb-ft).
Important:
It may be necessary to rotate the upper strut mount cover guide to match the hole in the strut tower.
12.
Position the strut to the vehicles strut tower, using the alignment pin as a guide.
13.
Install the upper strut cap-to-body nut.
Tighten
Tighten the nut to 110 N.m (81 lb-ft).
14.
Install the strut to steering knuckle bolts, leaving the nuts off.
15.
If applicable, place the wheel speed sensor harness and bracket to the bolt end.