ION L4-22L VIN F (2004) > Automatic Transmission/Transaxle > Seals and Gaskets
9. Thread the J 45201 collar (1) onto the collet (3).
10. Turn the collar clockwise in order to remove the seal (87) from the case bores.
11. Discard the seal (87).
12. Clean the cooler line seal case bores.
Installation Procedure
1. Insert a new transaxle cooler line seal into the case bore.
2. Remove the nub from the J 41239-1.
3. Install the nub of the J 41239-1 on the cooler line seal
4. Tap the new cooler line seal into the case bore.