ION L4-2.2L VIN F (2004)
9. Connect the surge tank inlet hose to the surge tank.
10. Install the positive battery cables (1) to the under hood electrical center.
^
Tighten the positive cable nut to 15 Nm (11 ft. lbs.).
11. Connect the engine control module harness connectors (3,4).
12. Install the under hood electrical center cover.
13. Raise the vehicle.
14. Hand start the front transmission mount through bolt
15. Hand start the rear transmission mount through bolt.
16. Tighten the front transmission mount through bolt.
^
Tighten the bolt to 100 Nm (74 ft. lbs.).
17. Tighten the rear transmission mount through bolt.
^
Tighten the bolt to 100 Nm (74 ft. lbs.).