saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Transmission Position Switch/Sensor, CVT > < Transmission Mount Bracket Replacement - Rear|Page 5879
Page 5
background image

13. Install the positive battery cables (1) to the under hood electrical center. 

^

Tighten the positive cable nut to 15 Nm (11 ft. lbs.).

14. Connect the engine control module harness connectors (3,4).
15. Install the under hood electrical center cover.
16. Install the air cleaner assembly. 
17. Raise the vehicle.
18. Install the cradle. 
19. Lower the vehicle.
20. Connect the negative battery cable. 

Transmission Position Switch/Sensor, CVT > < Transmission Mount Bracket Replacement - Rear|Page 5879