ION L4-2.2L VIN F (2004)
11. Remove the left instrument panel closeout panel.
12. Position the drivers side front carpet aside.
13. Separate the grommet (1) from the floor pan.
14. Remove the cable from the vehicle by pulling the cables through the drivers floor opening.
Installation Procedure
1. Feed the cable assembly through the drivers floor opening.
2. Install the grommet (1) flush with the floor opening.
3. Install the drivers side front carpet.
4. Install the left instrument panel closeout panel.
5. Raise the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the shift cable attachment nut to the underbody.