ION L4-2.2L VIN F (2004)
Transmission Mount: Service and Repair
Transmission Mount Replacement - Side
Transmission Mount Replacement - Side
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the under hood electrical center cover.
3. Disconnect the engine control module harness connector (3,4).
4. Disconnect the positive battery cables (1) from the under hood electrical center.
5. Disconnect the surge tank inlet hose from the surge tank.
6. Remove the under hood electrical center tray bracket nuts (1,2) and bolt (3).
7. Disconnect the wiring harness retainer from the tray bracket.