ION L4-2.2L VIN F (2004)
Using the J 39637, remove the wiper arm from the wiper transmission pivot stud.
Wiper Arm Installation
Align the wiper blades at the bottom of the wipe pattern as shown above.
Install the wiper arms onto the wiper transmission pivot stud.
Install the wiper arm nut.
Tighten:
Tighten the nut to 25 N.m (18 lb ft). TURN the ignition to the ON position.
Operate the windshield wipers and inspect for proper operation.
TURN the ignition to the OFF position.
The Wiper Arm Removal Tool J 39637 is available from SPX/Kent-Moore at 1-800-GM-TOOLS.