ION L4-2.4L (2007)
6. Install the front seat to the vehicle.
Caution: To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim.
Failure to do so may cause the system to malfunction.
7. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is
removed. Refer to Passenger Presence System Programming and Setup.
Rear Seat Cushion Cover and Pad Replacement (Coupe)
Rear Seat Cushion Cover and Pad Replacement (Coupe)
Removal Procedure
1. Remove the rear seat cushion.
2. Remove the rear seat center console.
3. Remove the J hook retainers from the seat cushion cover.
Notice: Use care when disengaging the hook and loop fasteners. The hook end may pull from the seat foam pad, requiring foam pad replacement.
4. Remove the seat cushion trim cover from the seat pad, carefully disengaging the hook and loop retainers.
Installation Procedure
1. Install the seat cushion trim cover to the seat pad, pressing over the hook and loop locations to engage the retainers.
2. Install the J hook retainers to the cushion trim cover.