ION L4-2.4L (2007)
32. Inspect the brake pipe flare for correct shape and diameter (a).
^
6.92 mm (0.272 in) within 0.18 mm (0.007 in) flare diameter for 4.76 mm (3/16 in) diameter pipe
^
8.92 mm (0.351 in) within 0.18 mm (0.007 in) flare diameter for 6.35 mm (1/4 in) diameter pipe
Important: When installing the pipe, maintain a clearance of 19 mm (3/4 in) from all moving or vibrating components.
33. If necessary, using the removed section of brake pipe as a template, shape the new pipe with a suitable brake pipe bending tool.
34. Install the pipe to the vehicle with the appropriate brake pipe unions, as required.
^
For correct pipe routing to the ABS modulator, Refer to Hydraulic Brake Pipe Routing - Master Cylinder to ABS.
^
For correct pipe routing to the proportioning valve assembly, Refer to Hydraulic Brake Pipe Routing - Master Cylinder to Proportioning
Valve Assembly.
35. If previously released, secure the brake pipe to the retainers.
36. Bleed the hydraulic brake system.
37. With the aid of an assistant, inspect the brake pipe flares for leaks by starting the engine and applying the brakes.