ION L4-2.4L (2007)
![background image](/saturn/ion/l4-2.4l/Page-1299006.png)
16. Crimp the boot retaining clamp using the SA9203C.
17. Measure the clamp end gap (a), taking care not to exceed 3 mm (0.118 in). Repeat the previous step as necessary.
16. Crimp the boot retaining clamp using the SA9203C.
17. Measure the clamp end gap (a), taking care not to exceed 3 mm (0.118 in). Repeat the previous step as necessary.