ION L4-2.4L (2007)
Shifter M/T: Service and Repair
Getrag 5 Speed - Manual Transmission
Shift Control Replacement
Shift Control Replacement
Removal Procedure
1. Remove the console top cover.
2. Remove the shift cables from the shifter assembly.
3. Remove the 2 front mounting nuts (2).
4. Remove the 2 rear mounting nuts (3) and the shifter.
Installation Procedure
1. Position the shifter on the studs and install the front 2 nuts (2).
Notice: Refer to Fastener Notice.
2. Install the 2 rear nuts (3).
Tighten the nuts to 25 N.m (18 lb ft).
3. Install the shift cables.
4. Install the console.