L100 L4-2.2L VIN F (2001)
3. Remove driver inflator module.
4. Disconnect cruise control (if equipped) switch connectors and disconnect harness from steering wheel.
5. Remove steering wheel attachment nut and discard.
6. Install Steering Wheel Puller
Steering Wheel Puller Bridge J1859A and Steering Wheel Puller Legs J42578 (or equivalent).
If a roll connector is removed without the wheels in the straight ahead position, the same roll connector may be installed if the steering shaft and coil
hub have not rotated.
7. Remove steering wheel while feeding wiring through wheel opening.
