L100 L4-2.2L VIN F (2001)
Stabilizer Bushing: Service and Repair
Front
STABILIZER BAR BUSHINGS
REMOVAL
IMPORTANT: On vehicles with L61 engines and cruise control, it is necessary to remove the left stabilizer bar clamp with vehicle on hoist.
1. Remove stabilizer bar clamps.
2. Remove bushing from stabilizer bar.
INSTALLATION
NOTICE: The opening in the stabilizer bar bushing must face toward the rear of vehicle.
1. Install new stabilizer bar bushings.
2. Install stabilizer bar clamps and tighten
Torque: Stabilizer Bar Clamp-to-Frame Bolts: 20 Nm (15 ft. lbs.)