L200 L4-2.2L VIN F (2002)
3. Remove the rear seat upper shoulder belt fastener cover.
4. Remove the rear seat upper shoulder belt fastener to remove the shoulder belt.
5. Starting at the front edge of the molding, pull at the attaching clips to remove the molding assembly.
Installation Procedure
Caution: Apply Loctite 242(R) Threadlocker US P/N 12345382 (Canadian P/N 10953489), or equivalent, on all restraint bolts/nuts before
installation. Failure to use such threadlocker correctly may result in personal injury.
1. Position the side molding at the attaching clips.
2. Secure the side molding by pushing gently at the clip locations.