L200 L4-2.2L VIN F (2002)
Trim Panel: Service and Repair
Rear Header Trim Panel Replacement
Rear Header Trim Panel Replacement
Removal Procedure
1. Loosen the molding at the top rear area of the vehicle by pulling on the left and right side quarter glass upper moldings.
2. Disengage the attaching clips by pulling on the headliner rear molding.
3. Remove the molding.
Installation Procedure
1. Position the headliner rear molding at the attaching clip locations.
2. Snap the molding into place by gently pushing at the clip locations.
3. Install the left and right side of the quarter glass upper moldings.