L200 L4-2.2L VIN F (2002)
![background image](/saturn/l200/l4-2.2l_vin_f/Page-2414026.png)
1. With your hand, push on seat back foam to expose seat bracket outer retainer.
2. Unlatch rear seat back. Leave seat in upward position.
3. Using a fiat blade screwdriver, gently pry outer seat bracket retainer inward while pulling upward on the seat back to disengage outer bracket from
pivot pin.
4. Tilt seat back down to align inner pivot tabs then pull seat back outward to remove seat back.
Wagon-Driver's Side
1. Lower passenger side rear seat back to full down position.
2. Unlatch rear seat back. Leave seat in upward position.
3. With your hand, push on seat back foam to expose seat bracket outer retainer.
4. Using a flat bladed screwdriver, gently pry outer seat bracket retainer inward while pulling upward on seat back to disengage outer bracket from
pivot in.
5, Lift seat back up and remove from vehicle.
Installation